Metal buildings in Saginaw, Texas
Rolled and built in Azle, 19.7 miles away.
Saginaw is train and grain, and it is not a barndominium market. Two railroads run through the middle of town and the flour mills are visible from miles out. What sells here is working commercial steel.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Saginaw.
19.7 miles, about 30 minutes
FM 730 north to SH 199 east, then I-820 to Saginaw Boulevard. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Saginaw
actually orders
Every town on this list buys something different. These are the four we put up most around Saginaw, in that order.
Commercial red iron
Shop buildings for trades contractors
Equipment and fleet storage
Carports and patio covers
Why a building in Saginaw
is spec'd differently
Union Pacific and BNSF both run through the center of town, supporting rail-served heavy industry. Commercial and industrial, not acreage.
The grain elevators and flour mills are the landmark, and they set the tone: this is a place that builds for trades contractors, fleet storage and equipment.
Saginaw maintains a Registered Contractors list. Ask us about it before you plan a Saginaw job.
Population 26,706 — Census QuickFacts, July 2025 — up 11.7% since 2020.
Who permits a building
in Saginaw
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Saginaw publishes separate named forms for exactly the things we build: an Accessory Detached form, a Carport form and a Patio Cover form. Site plans and construction drawings may be required, and the city keeps a Registered Contractors list.
Building Inspections & Permits · (817) 232-4640 · permits@saginawtx.org · official page
Tarrant County states plainly that residential building permits are not required in unincorporated Tarrant County.
Confirmed as required regardless of any building permit:
- Platting and subdivision review
- Drainage and stormwater control on sites over one acre
- Floodplain development permit inside a Special Flood Hazard Area
- Roadway construction approval
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Saginaw, answered
before you ask
Do I need a permit for a metal building in Saginaw, TX?
Saginaw publishes separate named forms for exactly the things we build: an Accessory Detached form, a Carport form and a Patio Cover form. Site plans and construction drawings may be required, and the city keeps a Registered Contractors list. Outside the city limits you are dealing with Tarrant County instead, and the requirements are different. We will tell you which set applies to your address before you order.
How far is Crestline from Saginaw?
Our yard is at 7620 Veal Station Rd, Azle, TX — 19.7 miles and about 30 minutes from Saginaw via FM 730 north to SH 199 east, then I-820 to Saginaw Boulevard. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Saginaw?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Saginaw?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Saginaw?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.