Metal buildings in Fort Worth, Texas
Rolled and built in Azle, 20.8 miles away.
SH 199 connects our yard to Fort Worth without touching a freeway, and it runs straight through the northwest side — Lake Worth, Sansom Park, River Oaks, the whole Jacksboro Highway corridor. That is the part of Fort Worth where we are genuinely the closest steel yard, and it is the part we are honest about serving best.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Fort Worth.
20.8 miles, about 35 minutes
FM 730 north to SH 199 east — Jacksboro Highway all the way in. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Fort Worth
actually orders
Every town on this list buys something different. These are the four we put up most around Fort Worth, in that order.
Shops and garages
Commercial red iron
Carports and patio covers
Panels over the counter
Why a building in Fort Worth
is spec'd differently
Fort Worth is past a million people. We are not the closest supplier to all of it, and we will tell you if a job on the south side is better served by somebody nearer.
The Jacksboro Highway corridor on the northwest side is our natural market — a straight shot up 199 with no freeway and no downtown traffic.
Fort Worth has the most rigorous permit process of anywhere we work, and it publishes it properly. That is a good thing once you know what to file.
Population 1,028,117 — Census QuickFacts, July 2025 — Fort Worth has passed one million.
Who permits a building
in Fort Worth
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Fort Worth publishes a Residential Accessory Building Packet and a separate commercial accessory checklist. Carports, sheds and garages are classified as occupiable structures, so the application asks for total square footage rather than construction cost, and every document has to be submitted as a PDF.
Development Services · (817) 392-2222 · devcustomerservice@fortworthtexas.gov · official page
Tarrant County states plainly that residential building permits are not required in unincorporated Tarrant County.
Confirmed as required regardless of any building permit:
- Platting and subdivision review
- Drainage and stormwater control on sites over one acre
- Floodplain development permit inside a Special Flood Hazard Area
- Roadway construction approval
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Fort Worth, answered
before you ask
Do I need a permit for a metal building in Fort Worth, TX?
Fort Worth publishes a Residential Accessory Building Packet and a separate commercial accessory checklist. Carports, sheds and garages are classified as occupiable structures, so the application asks for total square footage rather than construction cost, and every document has to be submitted as a PDF. Outside the city limits you are dealing with Tarrant County instead, and the requirements are different. We will tell you which set applies to your address before you order.
How far is Crestline from Fort Worth?
Our yard is at 7620 Veal Station Rd, Azle, TX — 20.8 miles and about 35 minutes from Fort Worth via FM 730 north to SH 199 east — Jacksboro Highway all the way in. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Fort Worth?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Fort Worth?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Fort Worth?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.