Metal buildings in Azle, Texas
Rolled and built in Azle, 4.5 miles away.
Our yard is on Veal Station Road, four and a half miles from the middle of Azle, and the panel on your roof is rolled here rather than ordered from somebody else and trucked in. Nobody else selling metal buildings in this town makes their own panel.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Azle.
4.5 miles, about 10 minutes
FM 730 north off Veal Station Road, then Northwest Parkway. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Azle
actually orders
Every town on this list buys something different. These are the four we put up most around Azle, in that order.
Boat and RV covers
Shops and garages
Barndominium shells
Panels over the counter
Why a building in Azle
is spec'd differently
Azle straddles the Tarrant and Parker county line, so two houses on the same street can have two different permit answers. We are on the Parker side.
Eagle Mountain Lake means boat covers, RV covers and lakeside shops — a different set of spans and heights than a working ranch needs.
There is a self-storage yard operating next door to us on Veal Station Road. The storage demand on this stretch is not a theory.
Population 15,365 — Census QuickFacts, July 2025 — up 15.1% since 2020.
Who permits a building
in Azle
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
The City of Azle maintains a page specifically for accessory structures — carports, patio covers and sheds — and takes permits through an online portal. Confirm the size threshold and the setbacks for your lot with Planning & Development before you pour.
Planning & Development · official page
We are not going to tell you Parker County does or does not require a building permit out here, because we have not confirmed it in writing and at least one competing page gets this exact question wrong. Call the county before you order, or call us at (817) 886-8172 and we will walk through it with you.
Confirmed as required regardless of any building permit:
- Septic / OSSF permit through the county Permitting Department
- Floodplain development permit inside a Special Flood Hazard Area
- 911 addressing for a new structure on a new drive
Part of Azle is in Tarrant County. Two properties on the same road can have two different answers, which is the most common reason a quote from an out-of-area company arrives with the wrong jurisdiction on it. Tarrant County states plainly that residential building permits are not required in unincorporated Tarrant County.
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Azle, answered
before you ask
Do I need a permit for a metal building in Azle, TX?
The City of Azle maintains a page specifically for accessory structures — carports, patio covers and sheds — and takes permits through an online portal. Confirm the size threshold and the setbacks for your lot with Planning & Development before you pour. Outside the city limits you are dealing with Parker County and Tarrant County instead, and the requirements are different. We will tell you which set applies to your address before you order.
How far is Crestline from Azle?
Our yard is at 7620 Veal Station Rd, Azle, TX — 4.5 miles and about 10 minutes from Azle via FM 730 north off Veal Station Road, then Northwest Parkway. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Azle?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Azle?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Azle?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.