Metal buildings in Haslet, Texas
Rolled and built in Azle, 31 miles away.
Haslet has grown 167% since 2020, the fastest of anywhere we serve, and it is the wealthiest market on this list by a wide margin. The buildings that go up here are expected to look finished, and the commercial ones are Alliance-scale.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Haslet.
31 miles, about 45 minutes
FM 730 north to SH 199 east, then I-820 north to I-35W and FM 156. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Haslet
actually orders
Every town on this list buys something different. These are the four we put up most around Haslet, in that order.
Insulated shops and finished garages
Commercial red iron
RV covers
Equipment storage
Why a building in Haslet
is spec'd differently
Median household income around $169,000 and median home value around $616,000. Insulated shops, finished interiors, colors matched to the house — this is not a bare-steel market.
Haslet borders Fort Worth Alliance Airport and the Alliance intermodal hub. Amazon, FedEx Freight, Coca-Cola, Kraft and Volkswagen all operate in the corridor, and the daytime population runs several thousand higher than the resident count.
Haslet’s 2020 strategic plan put over 80% of city land in agricultural or residential use and only about 5% industrial. The conversion is early, which is exactly when the shop buildings go up.
Population 5,267 — Census QuickFacts, July 2025 — up 166.7% since 2020.
Who permits a building
in Haslet
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Haslet requires contractor registration for electrical, mechanical, plumbing and irrigation work before it will issue the related permits. Get the registration moving early — the permit will not issue until it is done.
Building Inspections · (817) 439-5931 ext. 115 · official page
Tarrant County states plainly that residential building permits are not required in unincorporated Tarrant County.
Confirmed as required regardless of any building permit:
- Platting and subdivision review
- Drainage and stormwater control on sites over one acre
- Floodplain development permit inside a Special Flood Hazard Area
- Roadway construction approval
Part of Haslet is in Denton County. Two properties on the same road can have two different answers, which is the most common reason a quote from an out-of-area company arrives with the wrong jurisdiction on it. We have not confirmed how Denton County handles building permits in unincorporated areas, so we are not going to state it.
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Haslet, answered
before you ask
Do I need a permit for a metal building in Haslet, TX?
Haslet requires contractor registration for electrical, mechanical, plumbing and irrigation work before it will issue the related permits. Get the registration moving early — the permit will not issue until it is done. Outside the city limits you are dealing with Tarrant County and Denton County instead, and the requirements are different. We will tell you which set applies to your address before you order.
How far is Crestline from Haslet?
Our yard is at 7620 Veal Station Rd, Azle, TX — 31 miles and about 45 minutes from Haslet via FM 730 north to SH 199 east, then I-820 north to I-35W and FM 156. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Haslet?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Haslet?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Haslet?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.