Metal buildings in Rhome, Texas
Rolled and built in Azle, 22.9 miles away.
Rhome sits on the US 81/287 corridor, directly in the path of Fort Worth pushing north. It is a small town filling in fast, and it has the best-documented small-town permit process of anywhere we deliver.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Rhome.
22.9 miles, about 45 minutes
FM 730 north through Azle and Boyd, then SH 114 east to US 81/287. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Rhome
actually orders
Every town on this list buys something different. These are the four we put up most around Rhome, in that order.
Shops and garages
Commercial red iron
Carports
Equipment covers
Why a building in Rhome
is spec'd differently
The 2020 data put 100% of Rhome residents in rural areas. The 287 corridor is changing that quickly.
Veterans Memorial Park carries twelve plaques honoring service personnel from wars going back to 1917.
Being on 287 cuts both ways: easy freight access, and commercial neighbors arriving fast.
Population 2,032 — 2026 estimate — 1,630 at the 2020 census.
Who permits a building
in Rhome
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Rhome publishes an Accessory Structure Permit and a separate Carport Application as two distinct named forms, along with a fee schedule. The office runs Monday through Thursday 8 to 4 and Friday morning only, so do not plan a Friday afternoon permit run.
Building Requirements · (817) 636-2462 · official page
We are not going to tell you Wise County does or does not require a building permit out here, because we have not confirmed it in writing and at least one competing page gets this exact question wrong. Call the county before you order, or call us at (817) 886-8172 and we will walk through it with you.
Confirmed as required regardless of any building permit:
- Septic / OSSF permit through Wise County Environmental Services
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Rhome, answered
before you ask
Do I need a permit for a metal building in Rhome, TX?
Rhome publishes an Accessory Structure Permit and a separate Carport Application as two distinct named forms, along with a fee schedule. The office runs Monday through Thursday 8 to 4 and Friday morning only, so do not plan a Friday afternoon permit run. Outside the city limits you are dealing with Wise County instead, and the requirements are different. We will tell you which set applies to your address before you order.
How far is Crestline from Rhome?
Our yard is at 7620 Veal Station Rd, Azle, TX — 22.9 miles and about 45 minutes from Rhome via FM 730 north through Azle and Boyd, then SH 114 east to US 81/287. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Rhome?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Rhome?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Rhome?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.