Metal buildings in Paradise, Texas
Rolled and built in Azle, 26.3 miles away.
Paradise got its name because the area was a cowboy’s paradise, and 475 people across two square miles have not changed that much. This is ranch country, and the buildings that go up here are working buildings.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Paradise.
26.3 miles, about 40 minutes
FM 730 north to SH 199, then FM 51 north and SH 114 east. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Paradise
actually orders
Every town on this list buys something different. These are the four we put up most around Paradise, in that order.
Equipment and hay barns
Shops
Carports
Loafing sheds and livestock cover
Why a building in Paradise
is spec'd differently
About 475 people in two square miles. Ranch lots, not subdivisions.
Wise County is core Barnett Shale, so oilfield service equipment shares the county roads with hay trailers.
Paradise ISD is the center of the community and City Hall is on Main Street. There is no ambiguity about where things happen.
Population 475 — 2020 census.
Who permits a building
in Paradise
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Permits go through Building and Permitting. We have not published a threshold or a process for Paradise because we have not confirmed one, and a wrong permit answer costs you more than a slow one.
Paradise handles building and permitting out of City Hall on Main Street, 9 to 5 Monday through Thursday. City Hall is closed Fridays — worth knowing before you drive over with a plan set.
Building and Permitting · (940) 969-2114 · official page
We are not going to tell you Wise County does or does not require a building permit out here, because we have not confirmed it in writing and at least one competing page gets this exact question wrong. Call the county before you order, or call us at (817) 886-8172 and we will walk through it with you.
Confirmed as required regardless of any building permit:
- Septic / OSSF permit through Wise County Environmental Services
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Paradise, answered
before you ask
Do I need a permit for a metal building in Paradise, TX?
Paradise handles building permits through Building and Permitting, reachable at (940) 969-2114. We have not published a size threshold here because we will not guess at one — call them, or call us at (817) 886-8172 and we will point you at the right office for your address. Outside the city limits you are dealing with Wise County.
How far is Crestline from Paradise?
Our yard is at 7620 Veal Station Rd, Azle, TX — 26.3 miles and about 40 minutes from Paradise via FM 730 north to SH 199, then FM 51 north and SH 114 east. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Paradise?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Paradise?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Paradise?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.