Open to the public · Mon–Fri 8–6, Sat 8–1Need help? (817) 886-8172

A Crestline steel building of the kind built around Mineral Wells, Texas
Palo Pinto County and Parker County · 35.9 miles from the mill

Metal buildings in Mineral Wells, Texas

Rolled and built in Azle, 35.9 miles away.

Mineral Wells is one road change from our gate: FM 730 south to US 180 west and stay on it. It is also the most price-sensitive market we serve, and we would rather tell you that plainly than pretend otherwise.

Our own millAzle, TX
18 colorsOn the rack
35.9 miFrom Mineral Wells
24 hrsQuote turnaround
Priced Off Our Own Line

26ga panel, $3.48/lin ft,
18 colors on the rack

Type your run and see the number. These are the published prices this site charges, not a range we quote against later.

Material, before tax——
What that number is and is not.

Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Mineral Wells.

The Drive

35.9 miles, about 60 minutes

FM 730 south, then US 180 west straight through Weatherford. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.

From Mineral WellsTo the yard
Distance35.9 miles
DriveAbout 60 minutes
RouteFM 730 south, then US 180 west straight through Weatherford
CountyPalo Pinto County and Parker County
Yard hoursMon–Fri 8AM – 6PM CST
SaturdaySaturday 8AM – 1PM
The roll-forming line at the Crestline yard in Azle
What We Build Here

What Mineral Wells
actually orders

Every town on this list buys something different. These are the four we put up most around Mineral Wells, in that order.

01

Carports and RV covers

02

Shops

03

Equipment barns

04

Commercial red iron

Local

Why a building in Mineral Wells
is spec'd differently

Median home value here is about $161,000 — the lowest of anywhere we deliver. Value matters more than finish, and we will spec a building that way if you ask us to.

Fort Wolters trained nearly every helicopter pilot who flew in Vietnam. The site is an industrial park now, and Fort Wolters is still a source of real local pride.

Lake Mineral Wells State Park and Penitentiary Hollow bring boats, campers and climbing traffic — and the storage that follows them.

The long-running Baker Hotel restoration keeps downtown revitalization in the local conversation.

Population 15,983 — Census QuickFacts, July 2025 — up 7.9% since 2020.

Permits

Who permits a building
in Mineral Wells

Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.

Inside the Mineral Wells city limits

Permits go through Inspections & Compliance. We have not published a threshold or a process for Mineral Wells because we have not confirmed one, and a wrong permit answer costs you more than a slow one.

Mineral Wells issues building permits through Inspections & Compliance, but publishes nothing specific to carports or metal buildings. The city also spans two counties, so as in Azle, your side of the line matters outside the city limits.

Inspections & Compliance · (940) 328-7715 · inspections@mineralwellstx.gov · official page

Outside the city limits, in unincorporated Palo Pinto County

We are not going to tell you Palo Pinto County does or does not require a building permit out here, because we have not confirmed it in writing and at least one competing page gets this exact question wrong. Call the county before you order, or call us at (817) 886-8172 and we will walk through it with you.

Confirmed as required regardless of any building permit:

  • Subdivision platting where it applies
Mineral Wells straddles a county line

Part of Mineral Wells is in Parker County. Two properties on the same road can have two different answers, which is the most common reason a quote from an out-of-area company arrives with the wrong jurisdiction on it. We have not confirmed how Parker County handles building permits in unincorporated areas, so we are not going to state it.

Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.

What A Building Costs

Panel is priced above.
Buildings quoted in 24 business hours.

A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.

Common Questions

Mineral Wells, answered
before you ask

Do I need a permit for a metal building in Mineral Wells, TX?

Mineral Wells handles building permits through Inspections & Compliance, reachable at (940) 328-7715. We have not published a size threshold here because we will not guess at one — call them, or call us at (817) 886-8172 and we will point you at the right office for your address. Outside the city limits you are dealing with Palo Pinto County and Parker County.

How far is Crestline from Mineral Wells?

Our yard is at 7620 Veal Station Rd, Azle, TX — 35.9 miles and about 60 minutes from Mineral Wells via FM 730 south, then US 180 west straight through Weatherford. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.

What does metal roofing panel cost in Mineral Wells?

26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.

Do you make the panel yourself, or order it in?

We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.

Can I just buy the steel and build it myself in Mineral Wells?

Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.

the Baker Hotel

Building in Mineral Wells?

Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.

Dealer Portal