Metal buildings in Weatherford, Texas
Rolled and built in Azle, 16.9 miles away.
Weatherford is a straight run down our own road: FM 730 south, then US 180 west. It is also the cutting horse capital of the world, which means the buildings that go up here are barns, arenas, tack rooms and hay storage more often than they are garages.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Weatherford.
16.9 miles, about 30 minutes
FM 730 south — the Azle Highway — then US 180 west into town. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Weatherford
actually orders
Every town on this list buys something different. These are the four we put up most around Weatherford, in that order.
Horse barns and arena covers
Hay and equipment barns
Shops and commercial red iron
Barndominium shells
Why a building in Weatherford
is spec'd differently
The National Snaffle Bit Association is headquartered in Weatherford. Horse property is the dominant land use, and horse property needs clear span, ventilation and a roof that does not sweat on the tack.
Parker County has grown to about 185,000 people and is still 64% rural by land classification. The county seat is growing into ranch land, not over it.
A UTA campus is on the way to Parker County — worth knowing if you are siting a commercial building rather than a shop.
Population 40,634 — Census QuickFacts, July 2025 — up 31.6% since 2020.
Who permits a building
in Weatherford
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Weatherford requires a permit for any structure over 200 square feet, and says so explicitly for sheds, carports and decks. Accessory structures are one of the ten most common residential permits the city issues, and there is a dedicated Residential Accessory Structure Application form.
Development Services · (817) 598-4282 ext. 2 · permitapplications@weatherfordtx.gov · official page
We are not going to tell you Parker County does or does not require a building permit out here, because we have not confirmed it in writing and at least one competing page gets this exact question wrong. Call the county before you order, or call us at (817) 886-8172 and we will walk through it with you.
Confirmed as required regardless of any building permit:
- Septic / OSSF permit through the county Permitting Department
- Floodplain development permit inside a Special Flood Hazard Area
- 911 addressing for a new structure on a new drive
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Weatherford, answered
before you ask
Do I need a permit for a metal building in Weatherford, TX?
Weatherford requires a permit for any structure over 200 square feet, and says so explicitly for sheds, carports and decks. Accessory structures are one of the ten most common residential permits the city issues, and there is a dedicated Residential Accessory Structure Application form. Outside the city limits you are dealing with Parker County instead, and the requirements are different. We will tell you which set applies to your address before you order.
How far is Crestline from Weatherford?
Our yard is at 7620 Veal Station Rd, Azle, TX — 16.9 miles and about 30 minutes from Weatherford via FM 730 south — the Azle Highway — then US 180 west into town. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Weatherford?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Weatherford?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Weatherford?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.