Metal buildings in Poolville, Texas
Rolled and built in Azle, 26.8 miles away.
Poolville is unincorporated. There is no city hall, no city building department and no zoning board — Parker County is the only jurisdiction, and the school is the center of gravity. That simplifies some things and complicates others.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Poolville.
26.8 miles, about 40 minutes
FM 730 north to SH 199 northwest, then FM 920 south. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Poolville
actually orders
Every town on this list buys something different. These are the four we put up most around Poolville, in that order.
Equipment and hay barns
Shops
Loafing sheds
Wind-rated clear span
Why a building in Poolville
is spec'd differently
No city government at all. Whatever the answer is on permits, it comes from Parker County, not from a city office.
An EF1 tornado destroyed the historic Poolville Tabernacle in March 2023 and another EF1 came through in April 2025. Wind rating here is not a brochure line.
Poolville ISD runs three campuses and is the community anchor. The drive out is longer than the map suggests — FM 920 forces a wide arc.
Population 2,707 — community estimate — not an incorporated city.
Who permits a building
in Poolville
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Permits go through Parker County Permitting Department. We have not published a threshold or a process for Poolville because we have not confirmed one, and a wrong permit answer costs you more than a slow one.
There is no city office to visit. Everything routes to the county on Santa Fe Drive in Weatherford.
Parker County Permitting Department · 1114 Santa Fe Drive, Weatherford · official page
We are not going to tell you Parker County does or does not require a building permit out here, because we have not confirmed it in writing and at least one competing page gets this exact question wrong. Call the county before you order, or call us at (817) 886-8172 and we will walk through it with you.
Confirmed as required regardless of any building permit:
- Septic / OSSF permit through the county Permitting Department
- Floodplain development permit inside a Special Flood Hazard Area
- 911 addressing for a new structure on a new drive
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Poolville, answered
before you ask
Do I need a permit for a metal building in Poolville, TX?
Poolville handles building permits through Parker County Permitting Department. We have not published a size threshold here because we will not guess at one — call them, or call us at (817) 886-8172 and we will point you at the right office for your address. Outside the city limits you are dealing with Parker County.
How far is Crestline from Poolville?
Our yard is at 7620 Veal Station Rd, Azle, TX — 26.8 miles and about 40 minutes from Poolville via FM 730 north to SH 199 northwest, then FM 920 south. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Poolville?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Poolville?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Poolville?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.