Metal buildings in Granbury, Texas
Rolled and built in Azle, 42.4 miles away.
Granbury is a full hour from our yard and we are not going to pretend otherwise. What we will say is that Hood County is one of two counties on this list — Tarrant is the other — that publishes a clear answer about permits outside the city, and that is worth knowing before you buy the land.
26ga panel, $3.48/lin ft,
18 colors on the rack
Type your run and see the number. These are the published prices this site charges, not a range we quote against later.
Panel only — no trim, screws, closures or framing, and no tax. Each panel covers 3 ft of wall or roof, so a 30 ft wall takes 10 of them plus the overlap you plan for. Published prices are delivered prices with freight already inside them, so loading out at the yard in Azle costs less than this figure. Cut-to-length is rolled after you order, not pulled off a rack — call (817) 886-8172 before you drive out from Granbury.
42.4 miles, about 60 minutes
FM 730 south to FM 3325, then FM 1187 south to US 377. That is the whole trip. Come make it — the yard is open to the public Monday through Saturday, and looking at a panel profile in daylight beats looking at a swatch on a phone.
What Granbury
actually orders
Every town on this list buys something different. These are the four we put up most around Granbury, in that order.
RV and boat covers
Hobby workshops and garages
Barndominium shells
Carports
Why a building in Granbury
is spec'd differently
Roughly a third of Granbury residents are 65 or over and the median age is over 50. This is a lake-retirement market: RV covers, boat covers and hobby workshops, not welding shops.
Lake Granbury, dammed on the Brazos in 1969, is the reason the town grew. Waterfront lots, weekend properties and covered storage.
An EF4 tornado hit Granbury in May 2013. Wind rating is a live subject here and people ask about it directly.
The historic square and the Granbury Opera House are among the best-known in Texas. If your lot is in or near the historic district, check with the city before you settle on a finish.
Population 13,263 — Census QuickFacts, July 2025 — up 21.0% since 2020.
Who permits a building
in Granbury
Most pages on this subject were written by a company in another state. Here is what we can stand behind, and where we will tell you to pick up the phone rather than guess.
Permits go through Building Inspections, Permits & Code Enforcement. We have not published a threshold or a process for Granbury because we have not confirmed one, and a wrong permit answer costs you more than a slow one.
Granbury runs permits and inspections through Community Development and publishes a "When is a permit required?" FAQ. Read it, or ask them — the city rules are separate from the county answer below.
Building Inspections, Permits & Code Enforcement · official page
Hood County does not require building permits for residential construction in unincorporated areas.
Confirmed as required regardless of any building permit:
- Septic / OSSF permit through Environmental Health
- Road Access Permit through Road Operations
- Water well permit through the Upper Trinity Groundwater Conservation District
- Floodplain development permit inside a Special Flood Hazard Area
Not legal advice, and rules change. Confirm with the office before you pour concrete — or let us handle it, because permits are part of a dirt-to-finish contract.
Panel is priced above.
Buildings quoted in 24 business hours.
A building price moves with span, height, door openings and what the dirt looks like, so we put a real number on it in 24 business hours rather than publishing a figure that turns out not to apply to your lot. Tell us the dimensions you are thinking and we will price it.
Granbury, answered
before you ask
Do I need a permit for a metal building in Granbury, TX?
Granbury handles building permits through Building Inspections, Permits & Code Enforcement. We have not published a size threshold here because we will not guess at one — call them, or call us at (817) 886-8172 and we will point you at the right office for your address. Outside the city limits you are dealing with Hood County.
How far is Crestline from Granbury?
Our yard is at 7620 Veal Station Rd, Azle, TX — 42.4 miles and about 60 minutes from Granbury via FM 730 south to FM 3325, then FM 1187 south to US 377. Open to the public Monday through Saturday, so you can look at the actual panel profiles and colors before you order.
What does metal roofing panel cost in Granbury?
26ga panel starts at $3.48 per linear foot across 18 colors, and those are the published prices this site charges — not a range we quote against later. They are delivered prices with the freight already in them, so loading out at the yard costs less. Cut-to-length is rolled to order, so call (817) 886-8172 before you drive out.
Do you make the panel yourself, or order it in?
We roll it. The AG and PBR panels on your building come off our own line in Azle, cut to your length. We are not waiting on a supplier to ship, so a lead time is a date rather than a maybe, and the color you picked is the color that shows up.
Can I just buy the steel and build it myself in Granbury?
Yes. Panels, trim, doors, windows, fasteners and anchors are sold over the counter, and we will drop a labeled kit on your slab if you would rather set it yourself. Same steel either way.
Building in Granbury?
Tell us the dimensions and we will put a number on it inside 24 business hours. 7620 Veal Station Rd, Azle — Mon–Fri 8AM – 6PM CST, Saturday 8AM – 1PM.